Mechanical Engineering Final Year Project Topics

mechanical engineering project topics

Table of Contents

Mechanical Engineering Final Year Project Topics

In this article, we will be sharing a comprehensive list of final year project topics for all mechanical and production engineering students. The case studies and material specifications are randomized and can be modified to suit your purpose. Enjoy!

Mechanical Engineering Topics

  • DESIGN AND CONSTRUCTION OF DUAL–POWERED HEAT TREATMENT FURNACE
  • TRANSIENT HEAT CONDUCTION IN A SOLIDIFYING ALLOY
  • WATER PUMPING STATION INSTALLATION UPGRADE
  • DESIGN AND INSTALLATION OF CATHODIC PROTECTION SYSTEM USING ZINC ANODE
  • REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING
  • THE DESIGN AND FABRICATION OF MECHANICAL LAWN MOWER
  • REPAIR OF AN AIR CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT
  • FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
  • FABRICATION OF METAL SHELF
  • CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
  • DESIGN AND FABRICATION OF A METAL BOOKSHELF
  • DESIGN A ND FABRICATION OF A DUST EXTRACTOR
  • CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
  • THE CONSTRUCTION AND FABRICATION OF A METAL BOOK SHEET
  • DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT) Mechanical Engineering Project
  • DESIGN AND CONSTRUCTION OF A SPIN DRYER
  • REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION
  • DESIGN AND CONSTRUCTION OF A WOOD LATHE MACHINE
  • REPAIR OF A DAMAGED REFRIGERATOR
  • THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
  • DESIGN AND CONSTRUCTION OF BAKING OVEN Mechanical Engineering Project
  • CONSTRUCTION OF TWO FACE GAS BURNER
  • FABRICATION OF A FOLDABLE CAMP BED
  • DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF
  • CONSTRUCTION OF A STANDARD BANKING OVEN WITH DUAL POWER SOURCE (ELECTRIC/GAS)
  • THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
  • DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
  • THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE
  • CONSTRUCTION OF GRAIN GRINDING MACHINE
  • AN ELECTRIC POP-CORN MACHINE
  • DESIGN AND CONSTRUCTION OF A METALLIC BOOK SHELF
  • CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG VALVE BUS
  • THE FABRICATION OF A PRESSURIZED KEROSENE OVEN
  • INSTITUTE OF MANAGEMENT AND TECHNOLOGY ENUGU CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR
  • DESIGN AND FABRICATION OF CHILDREN SWING
  • DESIGN AND FABRICATION OF MOBILE DEEP FREEZER
  • DESIGN AND FABRICATION OF A PRINTING /BLOCK MACHINE
  • DESIGN AND FABRICATION A CORN SHELLING MACHINE
  • FABRICATION OF A FOLDABLE CAMP BED
  • REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
  • DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF
  • CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)
  • DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
  • CONSTRUCTION OF TWO FACE GAS BURNER
  • REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
  • DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE
  • DESIGN AND CONSTRUCTION OF A SPIN DRYER
  • DESIGN OF MELON DE-HUSKING AND SEPARATION MACHINE
  • DESIGN A ND FABRICATION OF A DUST EXTRACTOR
  • CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
  • THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHELF
  • DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
  • DESIGN AND CONSTRUCTION OF A WOOD-LATHE MACHINE
  • REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION
  • DESIGN AND FABRICATION OF CORN SHELLING MACHINE
  • DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER
  • DESIGN AND FABRICATION OF A CREEP TESTING EQUIPMENT
  • DESIGN AND FABRICATION OF A 12M3 MOBILE DEEP FREEZER
  • DESIGN AND CONSTRUCTION OF PUNCH AND DIE FOR PRODUCTION OF CUPS
  • DESIGN AND FABRICATION OF WOOD LATHE MACHINE
  • THE FABRICATION OF A SINGLE FACE PRESSURIZED KEROSENE COOKER
  • FABRICATION OF BENCH SHEARING MACHINE
  • FABRICATION OF BENCH SHEARING MACHINE
  • CONSTRUCTION OF A MOBILE REFRIGERATOR
  • REPORT ON CONSTRUCTION OF NYLON SEALING AND CUTTING MACHINE
  • REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING
  • REPAIR OF AN AIR CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT
  • FABRICATION OF A POLYTHENE BAG SEALING AND CUTTING MACHINE
  • CONSTRUCTION OF STEEL SHELF
  • THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE
  • THE CONSTRUCTION AND FABRICATION OF A CANDLE MOULDING MACHINE
  • THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTER AND AUDIO CONSOLE USING FREQUENCY MODULATION (FM) WITH POWER RATING OF 1 WATT
  • CONSTRUCTION OF CELLOPHANCE SEALING MACHINE
  • CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE
  • THE DESIGN AND FABRICATION OF MECHANICAL LAWN MOWER
  • CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE
  • DESIGN AND CONSTRUCTION OF JOURNAL BEARING DEMONSTRATION RIG
  • DESIGN AND CONSTRUCTION OF MITCHELL TILTING PAD APPARATUS
  • THE FABRICATION OF A PRESSURIZED KEROSENE OVEN
  • FABRICATION OF A POLYETHYLENE BAG SEALING AND CUTTING MACHINE
  • FABRICATION OF A STANDARD WHEELBARROW
  • DESIGN AND FABRICATION OF A MOBILE REFRIGERATOR
  • DESIGN AND CONSTRUCTION OF A SPIN DRYER
  • DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
  • DESIGN AND CONSTRUCTION OF BAKING OVEN
  • CONSTRUCTION OF STEEL CUPBOARD
  • CONSTRUCTION OF SHELL AND TUBE HEAT EXCHANGER
  • CONSTRUCTION OF PROPELLER AGITATOR
  • CONSTRUCTION OF GRAIN GRINDING MACHINE
  • REPAIR OF STOP CLOCKS
  • CONSTRUCTION OF INDUSTRIAL WHEEL BARROW
  • CONSTRUCTION OF PACKED DISTILLATION COLUMN
  • CONSTRUCTION OF FLOW NOZZLE
  • CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR
  • DESIGN AND CONSTRUCTION OF A REFRIGERATING UNIT
  • CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
  • CONSTRUCTION OF BOOK SHELVE
  • REPAIR AND FABRICATION OF A REFRIGERATOR SYSTEM
  • CONSTRUCTION OF A STANDARD DRAWING DESK
  • THE CONSTRUCTION AND FABRICATION OF BENCH SHEARING MACHINE
  • REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING
  • NYLON CUTTING AND SEALING MACHINE
  • THE CONSTRUCTION OF SIEVE EQUIPMENT
  • AUTOMOBILE MOTOR VEHICLE CONSTRUCTION
  • THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE
  • THE FABRICATION FOR A SET OF SIEVES AND SAKER
  • DETERMINATION OF STRATEGIES FOR ADEQUATE MAINTENANCE OF WORKSHOPS FOR EFFECTIVE INSTRUCTIONAL DELIVERY
  • DESIGN AND FABRICATION OF A METAL BOOKSHELF
  • DESIGN AND FABRICATION OF A METAL BOOKSHELF
  • THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
  • REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION
  • REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING
  • CONSTRUCTION OF TWO FACE GAS BURNER
  • FABRICATION OF A FOLDABLE CAMP BED
  • CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)
  • CONSTRUCTION OF DIGITAL WATER LEVEL CONTROLLER
  • FABRICATION OF METAL SHELF
  • REPAIR AND REHABILITATION OF FAULTY AIR CONDITIONER
  • DESIGN AND CONSTRUCTION OF A DIGITAL CLOCK
  • REPAIR OF A DAMAGED REFRIGERATOR
  • DESIGN AND CONSTRUCTION OF A SPIN DRYER
  • THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHEET
  • CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
  • DESIGN AND CONSTRUCTION OF MICROCONTROLLER BASED DOMESTIC REMOTE CONTROL SYSTEM
  • DESIGN AND CONSTRUCTION OF A SOLAR OPERATED AUTOMATIC STREET LIGHT CONTROL SYSTEM.
  • CONSTRUCTION OF BATTERY CHARGE CONTROL FOR PHOTOVOLTAIC SYSTEM
  • DESIGN AND CONSTRUCTION OF AUTOMATIC PUMPING MACHINE FOR WATER SUPPLY.
  • DEVELOPMENT OF NODAL ANALYSIS FOR PRODUCTION OPTIMIZATION: A SOFTWARE ASSISTED APPROACH
  • DESIGN AND CONSTRUCTION OF THREE PHASE, THREE HORSE POWER MOTOR.
  • THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
  • DESIGN AND CONSTRUCTION OF BAKING OVEN
  • DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
  • DESIGN AND CONSTRUCTION OF A WOOD LATHE MACHINE
  • REPAIR OF AN AIR CONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT
  • THE DESIGN AND FABRICATION OF MECHANICAL LAWN MOWER
  • ANALYSIS OF BUSH PEAR AND ITS OIL
  • DESIGN AND CONSTRUCTION OF A POWERED TOGGLE JACK SYSTEM
  • DESIGN AND CONSTRUCTION OF JOURNAL BEARING DEMONSTRATION RIG
  • DESIGN AND CONSTRUCTION OF MITCHELL TILTING PAD APPARATUS
  • PRODUCTION OF CASE HARDENING COMPOUND FOR SURFACE TREATMENT OF MILD STEEL FOR IMPROVE MECHANICAL PROPERTY
  • COMPARATIVE STUDY OF COMPRESSIVE STRENGTHS OF PALM KERNEL SHELL CONCRETE USING DIFFERENT CURING METHODS
  • DESIGN AND CONSTRUCTION OF AUTOMATIC CHANGE-OVER FOR THREE PHASES
  • DESIGN AND CONSTRUCTION OF A REMOTE CONTROLLED TRI–BAND FREQUENCY JAMMER
  • DESIGN, FABRICATION AND PERFORMANCE EVALUATION OF PEDAL OPERATED GROUNDNUT DECORTICATOR
  • EVALUATION OF MECHANICAL PROPERTIES OF PALM OIL FUEL ASH (POFA) BLENDED – GRANITE – GRAVEL CONCRETE
  • MODIFICATION AND TESTING OF BIOMASS DRYER
  • THE COILS PRODUCTION IN MANUFACTURING INDUSTRY
  • FABRICATE AND A PERFORMANCE EVALUATION OF A TRACTOR MOUNTED SINGLE ROW CASSAVA PLANTER IN A SYSTEM OF OPERATION
  • REVIEW OF INSUFFICIENT POWER SUPPLY AND EFFORT TO PROMOTE RENEWABLE ENERGY TECHNOLO-GIES IN NIGERIA
  • DESIGN OF A CENTRAL AIR-CONDITIONING SYSTEM FOR A 1000 CAPACITY LECTURE THEATRE
  • DESIGN AND EVALUATION OF PEDIATRIC GAIT REHABILITATION ROBOTS
  • REPAIR AND REHABILITATION OF A FAULTY AIR CONDITIONER
  • DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR P (1)
  • DESIGN AND CONSTRUCTION OF A WOOD LATHE MACHINE II
  • DESIGN AND CONSTRUCTION OF A SPIN DRYER DESIGN AND CONSTRUCTION OF A SPIN DRYER
  • CONSTRUCTION OF AN OPEN STEAM DISTILLATION COLUMN
  • DESIGN AND FABRICATION OF A PRINTING I BLOCK MACHINE
  • DESIGN AND CONSTRUCTION OF MITCHELL TILTING PAD APPARATUS
  • THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE
  • THE DESIGN AND FABRICATION OF MECHANICAL
  • REPAIR AND REHABILITATION OF FAUTY AIR CONDITIONER
  • DESCRIPTION OF COOLING MECHANISMS USING WATER JET IMPINGEMENT AS APPLIED TO RUN-OUT TABLE IN STEEL INDUSTRY
  • THE IMPACT OF JET APPARATUS
  • DESIGN AND MANUFACTURE A FUEL LESS GENERATOR
  • DESIGN AND CONSTRUCTION OF 2.5 KG WEIGHT BENCH VICE
  • CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE
  • CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)
  • CONSTRUCTION OF A WOODEN BOOK SHELF
  • CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
  • CONSTRUCTION OF GRAIN GRINDING MACHINE
  • CONSTRUCTION OF TWO FACE GAS BURNER
  • CONSTRUCTION OF AN OPEN STEAM DISTILLATION
  • DESIGN A ND FABRICATION OF A DUST EXTRACTOR
  • DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE
  • DESIGN AND CONSTRUCTION OF A SPIN DRYER
  • DESIGN AND CONSTRUCTION OF A WOOD LATHE
  • DESIGN AND CONSTRUCTION OF BAKING OVEN
  • DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)
  • DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF.
  • FABRICATION OF A FOLDABLE CAMP BED
  • FABRICATION OF METAL SHELF
  • RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU
  • REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO
  • DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE
  • RECTIFICATION AND REPAIR OF A FAULTY AIR CONDITIONER IN THE MECHANICAL ENGINEERING DEPARTMENT AT THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU.
  • AN APPRAISAL OF THE ACTIVITIES AND MANAGEMENT METHODS OF ANAMMCO WORKERS MULTI-PURPOSE CO-OPERATIVE SOCIETY (ENUGU).
  • ORIGIN AND DEVELOPMENT OF CO-OPERATIVE SOCIETIES IN NIGERIA (A CASE STUDY OF IMT MULTIPURPOSE CO-OPERATIVE SOCIETY ENUGU)
  • A PROJECT ON CONSTRUCTION OF PROPELLER AGITATOR
  • FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE
  • THE DESIGN AND FABRICATION OF MECHANICAL LAWN MOWER
  • THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE
  • THE CONSTRUCTION AND FABRICATION OF A CANDLE
  • REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT
  • REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION
  • OPERATION AND MAINTENANCE SCHEDULE OF A STEAM TURBINE PLANT
  • DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A SOLAR OVEN
  • A STOCHASTIC LINEAR PROGRAMMING APPROACH FOR THE PRODUCTION, DISTRIBUTION AND INVENTORY SYSTEMS OF THE NIGERIAN BOTTLING COMPANY (NBC):
  • ASSESSMENT OF OIL EXTRACTS FROM TIGER NUT(CYPERUS ESCULENTUS), WATER MELON (CITRULLUS VULGARIS) ANDNEEM SEEDS (AZADIRACHTA INDICA) AS CUTTING FLUIDS IN DRILLING OPERATION OF MILD STEEL
  • ASSESSMENT OF OIL SPILLAGE AND ITS CONTROL IN THE OIL AND GAS INDUSTRY IN NIGERIA
  • ASSESSMENT OF THE IMPACT OF POWER OUTAGES ON COMMERCIAL CONSUMERS
  • CHARACTERIZATION OF SOME NIGERIAN COALS FOR POWER GENERATION
  • DESIGN, DEVELOPMENT AND PERFORMANCE EVALUATION OF A FRUIT JUICE EXTRACTION MACHINE
  • DEVELOPMENT OF ENVIRONMENTALLY FRIENDLY BIODEGRADABLE CUTTING FLUID FROM SOYA BEANS (GLYCINE MAX)
  • ECONOMIC VIABILITY OF A SMALL HYDROPOWER PLANT
  • EFFECT OF FAULTY DESIGN AND CONSTRUCTION ON BUILDING MAINTENANCE
  • FINITE ELEMENT MODEL FOR PREDICTING RESIDUAL STRESSES IN SHIELDED METAL ARC WELDING OF MILD STEEL PLATES
  • INVESTIGATION OF MECHANICAL PROPERTIES OF ZEOLITE-Y AND ZSM-5 CATALYSTS SYNTHESIZED FROM LOCALLY AVAILABLE CLAYS
  • MANUFACTURING SYSTEM OPTIMIZATION: A STUDY OF UNITY AND EFFICIENCY IN PRODUCTION (UEP) IN PEUGEOT AUTOMOBILE NIGERIA (PAN)
  • MEASUREMENT AND EVALUATION OF THE PERFORMANCE PROPERTIES OF SELECTED LOCALLY PRODUCED LUBRICANTS (ENGINE OIL)
  • PERFORMANCE EVALUATION OF DIFFERENT MATERIALS AS CHILLS IN SAND CASTING OF ALUMINUM ALLOY
  • DESIGN AND CONSTRUCTION OF A BEDSIDE REFRIGERATOR
  • DESIGN AND ANALYSIS OF A SMALL-SCALE COST-EFFECTIVE CNC MILLING MACHINE
  • THE DESIGN OF A CNC MILL FOR PRODUCT PROTOTYPING
  • REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING
  • THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHEET
  • FABRICATION OF BENCH SHAPING MACHINE
  • PROJECT REPAIR AND FABRICATION OF A REFRIGERATOR SYSTEM
  • THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE
  • DESIGN AND FABRICATION OF A MOBILE DEEP FREEZER
  • THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER
  • DESIGN AND FABRICATION OF AN ELECTRIC STOVE AND OVEN
  • CONSTRUCTION OF A BENCH SHAPING MACHINE
  • USE OF LOCAL RAW MATERIALS AND ANIMAL BONE TO SIMULATE THE PRODUCTION OF HUMAN TEETH FOR DENTAL RESTORATIVE PRACTICE IN NIGERIA
  • THE EFFECT OF WEIGHT PERCENTAGE OF SILICON CARBIDE ON MECHANICAL BEHAVIOR OF ALUMINUM METAL MATRIX COMPOSITE
  • EVALUATION OF HOT- GAS AND HEATED TOOL WELDMENTS OF POLYPROPYLENE/BONE PARTICULATE COMPOSITES
  • EFFECT OF WELDING CONSUMABLES ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A WELDED SA 530 GR 70 STEEL
  • MECHANICAL PROPERTIES OF AN ALUMINUM OR SILICON CARBIDE COMPOSITE CONNECTING ROD CONTAINING VARYING VOLUME FRACTIONS OF SIC
  • DESIGN AND CONSTRUCTION OF A TWO-WHEEL MOTORIZED SCOOTER
  • A DECISION MODEL FOR THE DESIGN AND OPERATION OF INVENTORY PROGRAMMES IN A MANUFACTURING INDUSTRY
  • DESIGN AND CONSTRUCTION OF 2.5KG WEIGHT BENCH VICE
  • THE DESIGN AND FABRICATION OF AUTONOMOUS POLYMER-BASED
  • ELECTRIC POP CORN MACHINE
  • CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL WIRELESS REMOTE MOTOR VEHICLE FOR LONG DANZA BUS
  • AUTOMOBILE MOTOR VEHICLE CONSTRUCTION
  • NYLON CUTTING AND SEALING MACHINE
  • REPAIR OF A FAULTY REFRIGERATOR
  • REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER
  • CONSTITUTION AND FABRICATION OF BENCH SHEARING MACHINE
  • FABRICATION OF A STANDARD WHEELBARROW
  • CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR
  • FABRICATION OF A PRESSURIZED KEROSENE OVEN
  • CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE
  • CONSTRUCTION OF CELLOPHANCE SEALING MACHINE
  • REPAIR OF AN AIR CONDITIONER
  • FABRICATION OF BENCH SHEARING MACHINE
  • THE FABRICATION OF A SINGLE FACE PRESSURIZED KEROSENE COOKER
  • DESIGN AND FABRICATION OF WOOD LATHE MACHINE
  • DESIGN AND CONSTRUCTION OF PUNCH AND DIE FOR PRODUCTION OF CUPS
  • DESIGN AND FABRICATION OF A 12M3 MOBILE DEEP FREEZER
  • DESIGN AND FABRICATION OF A CREEP TESTING EQUIPMENT
  • DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER
  • DESIGN AND FABRICATION OF CORN SHELLING MACHINE
  • DESIGN OF MELON DE-HUSKING AND SEPARATION MACHINE
  • DESIGN AND FABRICATION OF A PRINTING /BLOCK MACHINE
  • DESIGN AND FABRICATION OF CHILDREN SWING
  • CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG VALVE BUS
  • THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE
  • DESIGN AND CONSTRUCTION OF A CREEP TESTING EQUIPMENT FOR LOW TEMPERATURE MELTING MATERIAL (PLASTICS)
  • BENCH SHAPING MACHINE
  • DESIGN AND CONSTRUCTION OF A 505 PEUGEOT PISTON MOULD
  • CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG DANZA BUS
  • DESIGN AND CONSTRUCTION OF A METALLIC BOOK SHELF
  • DESIGN A ND FABRICATION OF A CONCRETE FLOOR TILES MOULDING MACHINE
  • DESIGN AND CONSTRUCTION OF DUAL–POWERED HEAT TREATMENT FURNACE
  • TRANSIENT HEAT CONDUCTION IN A SOLIDIFYING ALLOY
  • DESIGN AND FABRICATION OF 80CM X 70CM X 50CM MOBILE DEEP FREEZER
  • DESIGN AND INSTALLATION OF CATHODIC PROTECTION SYSTEM USING ZINC ANODE
  • REHABILITATION OF INSTITUTE’S GROUP BUS
  • WATER PUMPING STATION INSTALLATION UPGRADE
  • REPAIR AND REHABILITATION OF A FACULTY AIR-CONDITIONER
  • CONSTRUCTION OF STEEL SHELF
  • THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTER AND AUDIO CONSOLE USING FREQUENCY MODULATION (FM) WITH POWER RATING OF 1 WATT
  • THE RATE OF BLEACHING OF PALM OIL WHITE COAL
  • PRODUCTION OF CASSAVA FLOUR USING TRADITIONAL PROCESSING METHOD AND MODERN PROCESSING METHOD
  • DEVELOPING THE PROCESS OF PLASTIC INDUSTRY IN NIGERIA
  • CHARACTERIZATION OF SOME BRANDED MOTOR OIL
  • PRODUCTION OF HIGH QUALITY BODY PERFUME
  • PROCESS DEVELOPMENT IN THE PRODUCTION OF VEGETABLE OIL FROM LOCAL RAW MATERIAL
  • COMPARISON RESEARCH ON SOAP AND DETERGENT POWDER
  • PRODUCTION OF VEGETABLE OIL USING ENUGU COAL
  • NEW FORMULAE FOR ESTIMATING FIXED INVESTMENT CAPITAL COSTS
  • PRODUCTION OF HOUSE HOLD INSECT- KILLER
  • RESEARCH PROJECT ON BLEACHING OF PALM OIL WITH NIGERIA CLAY
  • MODIFICATION OF MODEL SEDIMENTATION TANK
  • CONSTRUCTION OF METAL MOULD FOR SOAP PRODUCTION
  • CONSTRUCTION OF A SIMPLE METALLIC MOULD
  • DESIGN AND IMPLEMENTATION OF AN AUTOMATED CAR PLATE NUMBER RECOGNITION SYSTEM
  • CONSTRUCTION AND DESIGN OF 12 VOLT CAR BATTERY CHARGER CIRCUIT WITH PHONE CHARGING USB PORT
  • THE DESIGN AND CONSTRUCTION OF FM RADIO TRANSMITTER
  • POTENTIAL-ENHANCEMENT OF DEGRADED ENGINE OIL FOR FRICTION REDUCTION IN COLD UPSET FORGING OF ALUMINUM ALLOYS
  • FAILURE ANALYSIS AND DEVELOPMENT OF HIGH WEAR RESISTANT LOCALLY- MANUFACTURED GOLD – MILL GRINDING PLATES
  • DEVELOPMENT AND CHARACTERIZATION OF GLASS CERAMIC FROM COCA-COLA GLASS BOTTLE AND MAGNETITE
  • CORROSION INHIBITION OF DOUBLE THERMALLY-AGED HIGH PRESSURE DIE CAST (SSM-HPDC) AL-SI-MG ALLOY BY NEEM SEED AND GUAVA LEAF EXTRACTS
  • A STUDY OF THE DEVELOPMENT, CHARACTERIZATION AND DEGRADABILITY OF POLYESTER/NANO-LOCUST BEAN PODS ASH COMPOSITE
  • CHARACTERIZATION OF AZARA COPPER ORE DEPOSIT, NASARAWA STATE, NIGERIA
  • DESIGN AND CONSTRUCTION OF A 1KVA MOBILE SOLAR GENERATOR
  • DESIGNING AND CONSTRUCTING OF AN AUTOMATED LIGHT SYSTEM USING PHOTO-SENSITIVE SWITCH
  • DISTRIBUTED DATA MINING IN CREDIT CARD FRAUD DETECTION
  • THE INHIBITIVE EFFECT OF ALANINE ON CORROSION OF ALUMINUM IN 0.5 M HCL SOLUTION USING THE WEIGHT LOSS TECHNIQUE
  • DESIGN AND FABRICATION OF A DEEP FREEZER
  • DESIGN AND FABRICATION OF A PORTABLE CASSAVA GRATER
  • DESIGN AND FABRICATION OF DOMESTIC DEEP FREEZER
  • FABRICATION AND CONSTRUCTION OF WINDOW BURGLAR PROOF
  • FABRICATION OF A PEPPER GRINDING MACHINE
  • FABRICATION OF ELECTRICAL POP CORN MACHINE
  • FABRICATION OF METAL PANEL DOOR
  • DESIGN AND FABRICATION OF GROUNDNUT SHELLING MACHINE
  • DESIGN AND PRODUCTION OF CEILING BOARD USING PLASTER OF PARIS (P.O.P) GYPSUM MATERIAL
  • OPERATION AND MAINTENANCE OF STEAM BOILER
  • PRODUCTION OF ALUMINUM POTS
  • DETERMINATION OF THE CHARACTERISTIC STRENGTH PROPERTIES OF MILD STEEL REINFORCEMENT IN ILORIN METROPOLIS

 

Thank you for reading. Don’t forget to share with your friends. Feel free to ask for clarifications via the comment section.

 

Related Articles:

Why You Sleep Whenever You Pick Up Your Book & How To Stay Awake!

Preparing For Life After School: 5 Crucial Steps

2020 PTDF Scholarship: Full Application Guide

List of Ongoing Abroad Scholarships for Undergraduate and Master Students

Undergraduate Scholarships: Reasons Why Students Fail To Secure It

About Prince Nchiba 131 Articles
Prince Nchiba is blogger, content creator, engineer, a data analyst and a crypto enthusiast.

Be the first to comment

Leave a Reply

Your email address will not be published.